Blastrac was de uitvinder van de eerste mobiel straalmachine in de jaren ’80. Sindsdien is ons bedrijf sterk ontwikkeld en is het overal ter wereld bekend en gewaardeerd door aannemers en gebruikers van ons uitgebreide assortiment professionele oppervlaktebehandelings apparatuur. Met meer dan 50 verschillende, in eigen huis beproduceerde oppervlaktevoorbereidingsmachines, heeft Blastrac het grootste aanbod dat op de markt verkrijgbaar is.

Gebruiken meerdere technologieën 

Het gebruik van meerdere oppervlaktevoorbereidingstechnieken betekent: een berer uitziend eindresultaat, langere duur voor uw gereedschappen en lagere onderhoudskosten in de toekomst.

STRALEN

SCHOONMAKEN EN OPRUWEN VAN BETON EN ASFALT

Blastrac closed circuit media blasting machines throw a large amount of steel abrasive media by centrifugal force at the surface.

After the steel abrasive hits the surface, the shot blaster recycles the media. Dust and contaminants are removed by an air wash separator and are removed to a dedicated Blastrac dust collector. This makes the process almost dust free in operation. Blasting with steel shot is the most environmentally friendly abrasive blasting method there is, because there is no use of chemical products and no waste of valuable drinking water.

  • Schoonmaken en voorbereiden van ondergronden zoals staal, beton en asfalt
  • Verwijderen van toplagen zoals verf en epoxy
  • Verwijderen van wegmarkeringen en rubber van snelwegen, start- en landingsbanen en industriëlen vloeren
  • verbeteren van anti-slip op voet- en fietspaden, wegen en start- en landingsbanen
  • To genarate optical and aesthetics effect on surfaces like roads, highways and runways

Klik hier voor het complete straal machine assortiment

STAAL STRALEN

VOOR HET VERWIJDEREN VAN COATINGS EN VERF VAN STALEN OPPERVLAKTES

Blastrac is the most experienced manufacturer of steel blast-cleaning machines in the world, all of the  machines are designed for high quality and efficient performance with engineered durability.

In addition, Blastrac steel blast-cleaning machines are designed to comply with stringent industry standards for environmental friendliness and safety. Each unit has an integrated dust collection systems for work place safety and cleanliness. Ideal for applications such as:

  • Oil storage tanks & pipelines
  • Ship decks, hulls, and other steel surfaces
  • Off shore platforms, including helicopter landing pads
  • Specialized tools for specific jobs, such as underside ship bottom cleaning
  • A wide selection of vertical and horizontal steel surfaces

Klik hier voor het complete staal straal machine assortiment

EENKOPS SCHUURMACHINE

TO LEVEL UNEVEN FLOORS AND REMOVE THICK COATINGS

Blastrac is the market leader in the production of single disc floor grinding machines.

Thousands of customers around the world are working with our floor grinders. They have a solid reputation for quality of work produced on industrial, and decorative flooring, but also in decontamination and demolition markets. Available in many sizes and electric powered versions they can work any time and anywhere.

  • Ideal for leveling any uneven floors without having to remove too much material
  • Perfect for the removal of old paints / coatings / glues

Klik hier voor het complete eenkops schuurmachine assortiment

DRIE KOPPIGE SCHUUR- EN POLIJSTMACHINES

VOOR HET SCHUREN EN POLIJSTEN VAN GROTE OPPERVLAKTES

Blastrac triple disc floor grinders are equipped with a patented planetary grinding system.

This planetary grinding system is the most solid grinding principle on the market. All Blastrac triple disc floor grinders are equipped with three grinding plates, this ensures that the grinding head will always follow the floor and gives the best possible result. All triple disc grinders are suitable for the Diamag adapter plates for diamond grinding tools. Blastrac triple disc grinders have a proven reputation for quality of work produced on industrial, decorative flooring, but also in the decontamination and demolition markets. Available in many sizes and electric powered versions they can work any time and anywhere.

  • Grinding with diamond discs which doesn’t generate any vibration
  • They are often used for floor polishing
  • Can be used for grinding large floors
  • Allows you to reduce the amount of coating required (paint or resin) for your new floor

Klik hier voor het complete drie koppige schuurmachine assortiment

BUSH HAMMERING

THE EASIEST WAY TO TEXTURIZE STONE, CONCRETE & ASPHALT

Bush-hammering concrete is a process which enables you to achieve a similar effect as natural cut stone, with a concrete surface as basis.

The concrete is poured and mechanically abraded in order to give an authentic effect to outdoor areas. The bush-hammered concrete is the ideal solution for people who want to have a natural effect less smooth than the polished concrete, less rough than the brushed or blasted concrete and less decorative than the stamped concrete.

  • Make safety anti-slip surfaces on marble, granite and natural stones
  • Remove glue, varnish and resin coating
  • Break-down thick coating difficult to remove with normal diamond tools

Klik hier voor het complete drie koppige schuurmachine assortiment

FREZEN

TO LEVEL LARGE SURFACES OR REMOVE THICK COATINGS

With scarifying, cutters are loosely fitted on lateral shafts which are then placed inside a drum housing.

The drum is placed inside the machine and once the machine is switched on, the rotating drum generates centrifugal force which ‘throws’ the cutter at the surface, causing a mechanical cutting action. Dust and contaminants are moved to a dedicated Blastrac dust collector. This makes the process almost dust free in operation. Scarifying can be used for:

  • To remove difficult coatings | such as glues, rubber, and other coatings from floors
  • To remove hard and thick layers | of for example concrete and asphalt on highways and runways

Klik hier voor het complete freesmachine assortiment

VLOER STRIPPEN

VOOR HET VERIJDEREN VAN VLOERBEDEKKINGEN

Blastrac biedt een compleet assortiment stripmachines en gereedschappen voor het verwijderen van gelijmde en zachte vloerbedekkingen.

From the small but powerful walk behind stripper with a width of 305 mm to the heavy duty ride-on unit with a width of up to 690 mm, there is a Blastrac floor stripper to match every requirements. Our floor stripping machines are ideally suited for renovation jobs. They are very efficient, silent and easy to manoeuvre. These Blastrac machines are able to remove most (old) floor coverings such as hardwood parquet, ceramics, linoleum, vinyl, carpet, wove floor, glue, and roofing materials.

  • There is no emission and they are extremely silent. This allows work to continue with other trades and personnel in the vicinity.
  • Including linoleum, carpet, vinyl, ceramic tiles, resins and bituminised coatings.
  • They simply pass through standard doors and move into lifts. For this reason they are ideal for renovation jobs on upper floors and limited access areas.

Klik hier voor het complete vloer strippers assortiment